Manitowoc Ice K00179 Manuel d'utilisateur télécharger pdf

K00179

IB-0620/0820/1020

ON A CORNELIUS 30.00” WIDE ICE DISPENSER (ENDURO 200/250)

Installation Instructions

1. Set adapter on top of the dispenser. Be sure to position the adapter with the backside flange tight to the dispenser.

2. Using the slotted holes in the adapter as a template, drill four (4) 9/64” diameter holes at the bottom of the slots.

NOTE: Do not drill deeper than 1/4” past the sheet metal. Use a drill stop!

3. Fasten adapter to dispenser using the four (4) #8 screws supplied with the adapter kit.

4. Set the ice machine on top of the adapter. Align holes in ice machine front angle with the rivnuts on the adapter.

5. Secure the ice machine to the adapter with two (2) #8-32 thumbscrews supplied with the ice machine.

6. Set the front bin cover onto the dispenser. The back flange of the bin cover will latch onto the adapter.

7. Rotate retaining arms into position, as shown for normal ice machine operation.

Manitowoc Ice, Inc.

2110 South 26

Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8005903

Web Site - www.manitowocice.com Rev. 07/08/03

Cornelius ED200/250 Dispenser

#8-32 Thumbscrew

Two (2) Places

#8 Screw

4 Places

Bin Cover

RH Retaining Arm

LH Retaining Arm

K00179 IB-0620/0820/1020 ON A CORNELIUS 30.00” WIDE ICE DISPENSER (ENDURO 200/250)

Pas de commentaire

Manitowoc Ice K00179 Manuel d'utilisateur