Manitowoc Ice G-1700 Manuel d'utilisateur télécharger pdf

ICE CUBERS T ICE DISPENSERS T ICE STORAGE BINS

REACH-IN REFRIGERATORS & FREEZERS

ISO 9001 Quality System Certified

MANITOWOC EQUIPMENT WORKS

Division of The Manitowoc Company, Inc.

2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 U.S.A.

(

414-682-0161

FAX 414-683-7879

G-1700, 60 HZ., 1 PHASE COMPRESSOR, 7622153

REPLACEMENT INSTRUCTIONS

1. Remove the old compressor. Unsweat all tubes from the old compressor. Do

not cut them off.

2. Place the new compressor into the ice machine, as shown.

3. This replacement compressor may be different than the original compressor

and/or have slightly different tubing configurations. The suction line,

discharge line, and/or suction service line at the compressor may need to be

rerouted, when making this change-out.

4. Replace the compressor components (start relay, start capacitor, and run

capacitor) with the new ones provided. NOTE: The new start relay must be

mounted in the position shown.

5. Replace the filter drier with the new drier, as called out in the parts manual.

6. Evacuate the ice machine following the steps on the service bulletin.

7. Charge the ice machine with the nameplate charge.

8003453

Revised 10/26/95

ICE CUBERS T ICE DISPENSERS T ICE STORAGE BINS REACH-IN REFRIGERATORS & FREEZERS ISO 9001 Quality System Certified MANITOWOC EQUIPMENT WORKS D

Pas de commentaire

Manitowoc Ice G-1700 Manuel d'utilisateur