Manitowoc Ice K00066 Manuel d'utilisateur télécharger pdf

K00066 PANEL KIT

Installation Instructions

ATTENTION INSTALLER!

1. Before installing the new front panel, remove the insulation from the existing front panel and place it in the new front panel by

tucking all four edges under the flanges on the back side of the panel.

2. If installing these panels on an ice machine with a remote condenser, remove the black hole plug in the right-hand side panel

and install the supplied bushing.

NOTE: The louvers have been added to the new right-hand side panel to standardize this panel. These louvers will not

affect the operation of an ice machine with a remote condenser or a water-cooled condenser that previously did

not have louvers in the right-hand side panel.

3. The air baffle must be installed on air-cooled machines only to prevent the condenser air from recirculating. Install, as shown:

Manitowoc Ice, Inc.

2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 8003653

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Rev. 01/13/98

K00066 PANEL KIT Installation Instructions ATTENTION INSTALLER! 1. Before installing the new front p

Pas de commentaire

Manitowoc Ice K00066 Manuel d'utilisateur