Manitowoc-ice S Manuel d'utilisateur télécharger pdf (Page 41)

Section 3 Ice Machine Operation

Part Number 000000966 3-5

HARVEST SEQUENCE WATER PURGE

The harvest sequence water purge adjustment may be

used when the ice machine is hooked up to special

water systems, such as a de-ionized water treatment

system.

• The harvest sequence water purge is factory set for

45 seconds. Repositioning the jumper will set the

harvest water purge to 0 seconds. This setting does

not affect the SeCs or AuCs (cleaning) sequences.

• During the harvest sequence water purge, the water

fill valve energizes and de-energizes by time. The

water purge must be at the factory setting of 45

seconds for the water fill valve to energize during the

last 15 seconds of the water purge. If it is set to less

than 45 seconds, the water fill valve will not energize

during the water purge.

Water Purge Adjustment

For your safety and to eliminate errors, we recommend

that a qualified service technician make the harvest

water purge adjustment.

Warning

Disconnect electric power to the ice machine at the

electrical disconnect before proceeding.

Important

The harvest sequence water purge is factory-set at

45 seconds. A shorter purge setting (with standard

water supplies such as city water) is not

recommended. This can increase water system

cleaning and sanitizing requirements.

SV3139

SV3140

45 second

setting

0 second

setting

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Pas de commentaire

Manitowoc-ice S Manuel d'utilisateur Page 41