Manitowoc-ice Q Manuel d'utilisateur télécharger pdf (Page 11)

Part Number 000001530 2-1

Section 2

Installation Instructions

General

These instructions are provided to assist the qualified

installer. Check your local Yellow Pages for the name of

the nearest Manitowoc distributor, or call Manitowoc Ice,

Inc. for information regarding installation and start-up

services.

Ice Machine Installation Options

HEAD SECTION

The ice machine head can be installed with the electrical

inlet, water supply inlet and refrigeration tubing entering

from the back or top of the ice machine.

The ice machine water drain must exit the back of the

ice machine.

Cut the top cover for top routing of electrical inlet, water

supply inlet or refrigeration lines.

1. Prior to cutting, mount top cover onto ice machine.

2. Locate the area that will need to be cut and mark the

top cover.

3. Using a tin snips, cut top cover as needed:

A. Do not cut out entire area! Cut up to 1/8 inch to

marked line.

B. Cut out only what is needed. (If routing only

refrigeration lines out the top, cut just enough to

route these lines.)

C. Do not cut out the entire corner area.

Important

Failure to follow these installation guidelines may

affect warranty coverage.

TUBING CAN BE

ROUTED OUT TOP

SV1769A

TUBING CAN BE

ROUTED OUT

BACK OF THE ICE

MACHINE WITH

PROVIDED 90

ELBOWS

TRIM TOP COVER

IN THIS AREA

SV1768B

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Manitowoc-ice Q Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Congélateurs Manitowoc-ice Q